• Cantilever rack is especially for the storage of heavy and long material
• Single or double sided units are available, with various arm lengths and tower heights to choose from
• The distance between uprights can be selected to suit your requirement, giving easy access and loading of long material such as timber, pipe, bars, and rods
• Each arm is labeled to indicate its maximum load capacity and the arm position is easily adjusted
• Technical parameter of cantilever rack:
  • W of cantilever rack: 36, 48, 60, 72 inches
  • D of cantilever rack: 48, 60 inches
  • H of cantilever rack: 96, 108, 120, 144, 192 inches

• Drive-in Rack offers a high density of pallet storage with low selectivity
• Consequently, it is ideal for product with a high number of pallets per SKU
• This racking consists of a series of tunnels with rails on either side at multiple levels that supports the pallet
• Since Drive-in racks can be subject to more abuse than selective rack, rack integrity and strength are essential
• Drive in systems efficiently store large quantities of similar loads by allowing the forklift driver to enter the rack system and place the load on structural rails.
• The lift truck can enter the rack from one side to pick up or pull out pallets because the pallets can slide backwards on a continuous rail
• While forklifts can drive into the rack to access pallets 2 or more deep, the size of your facility may limit the depth of storage for a bay.
• Drive in rack is ideal when you have seasonal items that move quickly out of your inventory, or a large number of similar items that can be stored in a single pallet position and accessed last in, first out
• When stock rotation is an issue, Drive-in rack ensures that tunnels are fully emptied before replenishing
• Drive in rack is also ideal when you are storing a single type of load
• If you'd benefit from bulk storage, Drive-in rack can increase efficiency and cost savings

• The most widely used shelves
• The most popular and most economical form of a shelf
• Security convenient, full use of space
• Use convenient access methods used effectively with forklift loading, greatly enhancing operational efficiency
• Suitable for all warehouse, direct access goods

2) arrangement for all kinds of factory and warehouses

3) your order on special sizes are welcomed

4) different color and material is ok.

• Suitable for storage in producting line or assembling line
• Containers can slide along the roller because of gravity
• Storaging and taking goods is suitable for human bodies
• First-in First-out(FIFO) principle is fitted with roller tracks and dividers
• This can be effectively used with plastic containers, metal containers, and carton boxes
• The unique design of the roller rails and matching taper guarantees uninterrupted flow of goods

• Simple structure, easy to assemble and dismantle,
• You can choose type of deck for rack or shelf: steel board, wooden board, medium density fiberboard or laminated board
• Various shelf colors for your selection
• 3 layer

• Size: (L) 1,800 x (W) 500 x (H) 2,000mm
• Plastic powder spraying against rust
• Easy to be assembled and disassembled
• Thickness and size of beams are adjustable as well as layer boards
• Different sizes and colors are available

• Cantilever racks with H-columns are best suited for auto body storage
• Goods can be reached with forklift truck or a stacker crane in an ASRS warehouse system
• Cantilever goods shelf equip with adjustable clamp nip haul
• Adapt to storage, such as tactic long goods and steel etc
• Tailored services are welcome

• Advantages including:
  • High density storage, low capital cost, no crushing of goods
  • No special handling equipment required
  • Suited to situations where individual selectivity is not important, and the product rang is small, and the movement pattern is predictable, example is seasonal goods where input and output take place at different times
  • Best suited to the high cost warehouse, example in cold room
• Special requirements:
  • Limited selectivity, last-in-first-out (LIFO), stock rotation
  • Truck guidance recommended for systems storing more than four pallets deeps
  • Some pallet types are unsuitable
  • Lanes to be filled/emptied in vertical layers

• Drive in Rack offers a high density of pallet storage with low selectivity.
• Consequently, it is ideal for product with a high number of pallets per SKU
• This racking consists of a series of tunnels with rails on either side at multiple levels that supports the pallet
• Since Drive in racks can be subject to more abuse than selective rack, rack integrity and strength are essential
• Drive In systems efficiently store large quantities of similar loads by allowing the forklift driver to enter the rack system and place the load on structural rails.
• The lift truck can enter the rack from one side to pick up or pull out pallets because the pallets can slide backwards on a continuous rail
• While forklifts can drive into the rack to access pallets 2 or more deep, the size of your facility may limit the depth of storage for a bay.
• Drive in rack is ideal when you have seasonal items that move quickly out of your inventory, or a large number of similar items that can be stored in a single pallet position and accessed last in, first out
• When stock rotation is an issue, Drive in rack ensures that tunnels are fully emptied before replenishing
• Drive in rack is also ideal when you are storing a single type of load
• If you'd benefit from bulk storage, Drive in rack can increase efficiency and cost savings.

• Drive in Rack offers a high density of pallet storage with low selectivity.
• Consequently, it is ideal for product with a high number of pallets per SKU
• This racking consists of a series of tunnels with rails on either side at multiple levels that supports the pallet
• Since Drive in racks can be subject to more abuse than selective rack, rack integrity and strength are essential
• Drive In systems efficiently store large quantities of similar loads by allowing the forklift driver to enter the rack system and place the load on structural rails.
• The lift truck can enter the rack from one side to pick up or pull out pallets because the pallets can slide backwards on a continuous rail
• While forklifts can drive into the rack to access pallets 2 or more deep, the size of your facility may limit the depth of storage for a bay.
• Drive in rack is ideal when you have seasonal items that move quickly out of your inventory, or a large number of similar items that can be stored in a single pallet position and accessed last in, first out
• When stock rotation is an issue, Drive in rack ensures that tunnels are fully emptied before replenishing
• Drive in rack is also ideal when you are storing a single type of load
• If you'd benefit from bulk storage, Drive in rack can increase efficiency and cost savings.